The project is for the replacement of a pre-existing CT machine (by others) and refinishing of the CT room and the adjacent Control Room.

Construction will include but is not limited to:

1. Setting up hoarding, demolition of previous millwork, T-bar ceiling, pre-existing room finishes;
2. Removal of the pre-existing epoxy leveling slab under the CT;
3. Electrical work in the electrical room and cable gauge increase from the electrical room to the CT Room 1;
4. Scanning and coring of the pre-existing concrete slab and relocation of electrical feeds to the new CT location;
5. Procurement of specialized deliverables including but not limited to lead lined-doors, wall murals, and ceiling-mounted lift systems
6. Other electrical, mechanical, and structural construction work as defined on the project drawings to prep the room for the new CT unit and lift system;
7. Installing new millwork, flooring, paint, ceilings, lighting, and modifications to owner-supplied furnishings;
8. Clean-up to satisfy NHA standards and dismantling of hoarding.

Due to time constraints, project construction inside the CT Room 1 must be completed within as short a timeframe as possible. This will require the contractors to work extended weekday hours and potentially a weekend day. The contractors are advised to plan their budgets and resources as needed to satisfy this timeframe. Work outside of the CT Room 1 and control room may be worked on outside of the general construction period, if it is deemed feasible to do so.

Additional work will be needed at a later date to install the contractor-supplied lead-lined door.